|
|
BRIDGE ON D1 (LIETAVSKÁ LÚČKA - VIŠŇOVÉ) OVER VALLEY AT km 4.313
Hudyma, Nazar ; Dvořák, Tomáš (referee) ; Zich, Miloš (advisor)
The subject of this Master's thesis is the design of a road bridge on the D1 in the section Lietavská Lúčka - Višňové in the Žilina Region, Žilina District, Slovak Republic. The bridge is used to cross the valley in KM 4,313 and the road in KM 4,410. Three variants of bridging were proposed, but further in the work an assessment is made on one of the variants. The total length of the superstructure is 354.00 m, the theoretical total span of the structure is 352.00 m. The bridge has 4 spans and is constructed by free cantilever method .The locations of the supports were limited by unsuitable geological conditions at the construction site (active shear area in Quaternary sediments), especially in span No. 3 (span lenght 104.00 m) and span No. 4 (span lenght 75.00 m). The monolithic part of the bridge structure will be concreted by free cantilever method with the largest length of the cantilever 52.00 m. The outermost parts of fields No. 1 and No. 4 will be cast-in-place using fixed scaffolding.
|
|
|
Design of bridge on the motorway D48
Holuša, Adam ; Nováček, Jan (referee) ; Zich, Miloš (advisor)
Diploma thesis deals with design of a new bridge on motorway D48 located on bypass of Frýdek – Místek. Total spread of the bridge is 113 meters. Thesis includes 3 studies. For next assesment was chosen concrete girder box construction with 3 spans. Bridge is bulit on falsework. Structural analysis includes influences of construction by TDA method. Load effect is solved in Scia Engineer 18.0. The assessment of the bridge was made according to EC.
|
|
|
Bridge on a highway
Knotek, Jan ; Nečas, Radim (referee) ; Panáček, Josef (advisor)
Subject of this bachelor’s thesis is design of new slab bridge construction over the II/464 road between the villages Příbor and Bílovec. The bridge converts highway D47. Thesis includes three studies. Pre-stressed rectangular cross-section slab with elliptical exterior trim, pre-stressed plate- grinder construction and construction of prefabricated beams and monolithic slab. For next assessment was chosen option no.1. Load effects calculation is solved in SCIA engineer 16.1. Design and assessment of the structure are made according to valid standards and regulations.
|
|
|
Bridge on the D1 highway over a road and brook
Surovcová, Monika ; Zdražilová, Magda (referee) ; Panáček, Josef (advisor)
The aim of the diploma thesis is the proposal of a bridge structure in the direction of Přerov – Lipník in the cadastral territory of the Osek nad Bečvou. A bridge is used to overcome the road III/43612 in km 93,550, the stream Lubeň and a field trip. From tree alternatives is selected a post-tensioned two-beam concrete struction and assessed according to the limit states including an impact of phased construction according to the European standards. Also it is prepared a drawing documentation, an accompanying report and a visualization of the beam.
|
|
|
D3 motorway bridge at km 33,588 in Slovakia
Lipovský, Václav ; Řeřucha, Kamil (referee) ; Koláček, Jan (advisor)
The diploma thesis deals with the design of a motorway bridge carrying the D3 motorway over a deep valley between Svrčinovec and Skalité. Three variants were developed for this work, from which the variant of a prestressed box girder bridge with sloping walls was selected for a detailed solution. The main superstructure was designed as a continuous structure with five spans of post-tensioned concrete. The superstructure is concreted in phases by means of an movable scaffolding system. The total length of the supporting structure is 255.50 m. The bridge is straight in plan. The analysis of the structure was carried out by means of several models that were created in Scia Engineer 21.1. The assessments of ultimate limit state and serviceability limit state were made according to valid standarts. The analysis of the structure was carried out in longitudinal and transverse directions. This thesis also includes a time dependent analysis (TDA) that takes the construciton phases into account. Finally, drawings and visualizations were produced.
|
|
|
Highway bridge over wide wally
Mertová, Eliška ; Smejkal, Ing David (referee) ; Klusáček, Ladislav (advisor)
The aim of this diploma thesis was the design of three possible variants, how to span the wide and deep valley with a bridge. After an evaluation, situation of the highway on the only wide load-bearing structure which is constituted by a box girder with transverse cantilevers supported by prefabricated bar braces, was chosen as an optimal solving. The load- bearing structure made of post- tensioned concrete is going to be incrementally launched and be supported by one-column pillars along an axis of the motorway. The work is composed of a detailed design of this preferred variant, which is processed according to the ultimate and serviceability limit state including the construction stage analysis of the bridge by the construction technology by an incremental launching method.
|
|
|
Design of the bridge structure across the street
Váša, Jiří ; Pinkas, Karel (referee) ; Klusáček, Ladislav (advisor)
The diploma thesis deals with the design of the motorway bridge over the II / 464 road between Butovice-Bílovec. For the bridging design four variants were made, from which a variant of the slab with longitudinal extensions was selected for further processing. The design assessment was performed for the ultimate limit state and serviceability limit state according to valid standards. Determination of internal forces was performed on the model developed in Scia Engineer 18.0.
|
|
|
Bridge No. 203 on the highway D1, Považská Bystrica
Mudrík, Marián ; Štrba, Michal (referee) ; Karmazínová, Marcela (advisor)
The diploma thesis deals with alternative design of bridge on highway D1 near Považská Bystrica. Bridge is designed as composite steel-concrete bridge with 6 spans in length 35,7m + 42m + 42m + 42m + 42m + 35,7m. Overall length of superstructure of the bridge is 241m. Construction material used in design is steel S355, concrete C35/45 and reinforcing steel bars are grade B500B. Calculation of superstructure of two variants was performed in preliminary design. First variant is twin-girder structure system and box-girder structure system is second variant. Selected twin-girder bridge was developed in more complex structural design report. Direct erection in place with temporary piers was selected as assembly method of steel structure. Slab concreting will be done by mobile formwork. The design and calculation of the bridge structure was carried out according to valid European design codes. The diploma thesis includes engineering report, structural design report of variants, structural design report of final variant, bill of quantities of assembly parts and drawing documentation.
|
|
|
Highway bridge formed by cell box girder
Hošek, Filip ; Novotný, Petr (referee) ; Nečas, Radim (advisor)
Diploma thesis is focused on solving highway bridge over deep valley. From three studies has been chosen cell box girder with transverse overhangs.The static calculation contains limit states assessment, design of precast and time discetization analysis verification. Structure design contains temporary and pernament situations assessment according to EC. Last part of project is drawnings and visualization.
|
|
|
Static solution of bridge on the highway Jánovce-Jablonov
Darebníček, Pavel ; Šopík, Leonard (referee) ; Zich, Miloš (advisor)
The subject of Diploma thesis is the design of bridge on the highway Jánovce - Jablonov and his static solution. Selected variant is made from four span 34+44+44+34m and supporting structure consist of monolithic two beams of prestressed concrete. Height of cross section is over the whole lenght of the bridge constant. Each beams will be built on sliding formwork. The design of supporting structure is made according to limit states, including addressing timing analysis. Calculation of the effects of loading is made by software and reviews are calculated by hand according to Eurocode.
|
guest ::
